DEALER

Features

A Greener Serial-to-Ethernet Solution

The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A Series' power consumption is less than 1 W. The NPort® 5100A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today's industrial environments.

Surge Protection for Serial, Ethernet, and Power

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort® 5100A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-Step Web-based Configuration

The NPort® 5100A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5100A's web console guides users through three simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this fast 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

Easy to Troubleshoot

NPort® 5100A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert can be sent instead. Users can define the trigger for the alerts using Moxa's Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.

Specifications

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)	1
Magnetic Isolation Protection	1.5 kV(built-in)
Ethernet Software features
Configuration Options	Windows Utility, Serial Console, Telnet Console, Web Console (HTTP/HTTPS)
Management	DHCP Client、ARP、BOOTP、DNS、HTTP、HTTPS、ICMP、IPv4、LLDP、SMTP、SNMPv1/v2c、TCP/IP、Telnet、UDP
Filter	IGMP v1/v2
Windows Real COM Drivers	Windows 95/98/ME/NT/2000、Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64)、Windows 2008 R2/2012/2012 R2 (x64)、Windows Embedded CE 5.0/ 6.0、Windows XP Embedded
Linux Real TTY Drivers	Kernel versions: 2.4.X、2.6.x、3.x、4.x and 5.x
Fixed TTY Drivers	SCO UNIX、SCO OpenServer、UnixWare 7、QNX 4.25、QNX 6、Solaris 10、FreeBSD、AIX 5.x、HP-UX 11i、Mac OS X
Android API	Android 3.1.x and later
MIB	RFC1213、RFC1317
Serial Interface
Connector	DB9 male
No. of Ports	1
Serial Standards	NPort 5110/5110-T：RS-232 NPort 5130：RS-422、RS-485 Port 5150：RS-232、RS-422、RS-485
Operation Modes	Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
Baudrate	SupportedStandardsBaudrate(unit=bps): 50、75、110、134、150、300、600、1200、1800、2400、4800、7200、9600、19200、38400、57600、115200、230.4k、460.8k 、921.6k
Data Bits	5、6、7、8
Stop Bits	1、1.5、2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
Pull High/Low Resistor for RS-485	1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control	ADDC® (automatic data direction control)
Terminator for RS-485	120 ohms
Serial Signals
RS-232	TxD、RxD、RTS、CTS、DTR、DSR、DCD、GND
RS-422	Tx+、Tx-、Rx+、Rx-、GND
RS-485-4w	Tx+、Tx-、Rx+、Rx-、GND
RS-485-2w	Data+、Data-、GND
Power Parameters
No. of Power Inputs	1
Input Current	NPort 5110A：82.5 mA @ 12 VDC NPort 5130A：89.1 mA @ 12 VDC NPort 5150A：92.4 mA @ 12 VDC
Input Voltage	12 to 48 VDC
Source of Input Power	Power input jack
Reliability
Automatic Reboot Trigger	Built-in WDT
Physical Characteristics
Housing	Metal
Dimensions (with ears)	75.2 x 80 x 22 mm（2.96 x 3.15 x 0.87 in）
Dimensions (without ears)	52 x 80 x 22 mm（2.05 x 3.15 x 0.87 in）
Weight	340 g (0.75 lb)
Installation	Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature	NPort P5150A：0 to 60°C（32 to 140°F） NPort P5150A-T：-40 to 75°C（-40 to 167°F）
Storage Temperature (package included)	-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity	5 to 95%(non-condensing)
Standards and Certifications
EMC	EN 55032/24
EMI	CISPR 32，FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD：Contact：6 kV；Air：8 kV IEC 61000-4-3 RS：80 MHz to 1 GHz：10 V/m IEC 61000-4-4 EFT：Power：2 kV；Signal： 1 kV IEC 61000-4-5 Surge：Power：2 kV；Signal：0.5 kV IEC 61000-4-6 CS：150 kHz to 80 MHz：10 V/m；Signal：10 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIP
Safety	UL 60950-1
Declaration
Green Product	RoHS、CRoHS、WEEE
MTBF
Time	2,231,530 hrs
Standards	Telcordia (Bellcore) Standards TR/SR
Warranty
Warranty Period	5 years