MOXA/Dealer-YPRO

Introduction
Features
Specifications

Introduction

NPort® P5150A device servers are designed to make serial devices network-ready in an instant. It is a power device and is IEEE 802.3af compliant, so it can be powered by a PoE PSE device without an additional power supply. Use the NPort® P5150A device servers to give your PC software direct access to serial devices from anywhere on the network. The NPort® P5150A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible.

Features

Surge Protection for Serial, Ethernet, and Power

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort® P5150A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-Step Web-based Configuration

The NPort® P5150A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort® P5150A's web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

Easy to Troubleshoot

NPort® P5150A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert can be sent instead. Users can define the trigger for the alerts using Moxa's Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.

Specifications

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)	1
Magnetic Isolation Protection	1.5 kV(built-in)
Standards	PoE (IEEE 802.3af)
Ethernet Software Features
Configuration Options	Windows Utility, Serial Console, Telnet Console, Web Console (HTTP/HTTPS)
Management	ARP、BOOTP、DHCP Client、DNS、HTTP、HTTPS、ICMP、IPv4、LLDP、SMTP、SNMPv1/v2c、TCP/IP、Telnet、UDP
Filter	IGMP v1/v2
Windows Real COM Drivers	Windows 95/98/ME/NT/2000、Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64)、Windows 2008 R2/2012/2012 R2 (x64)、Windows Embedded CE 5.0/ 6.0、Windows XP Embedded
Linux Real TTY Drivers	Kernel versions: 2.4.X、2.6.x、3.x、4.x and 5.x
Fixed TTY Drivers	SCO UNIX、SCO OpenServer、UnixWare 7、QNX 4.25、QNX 6、Solaris 10、FreeBSD、AIX 5.x、HP-UX 11i、Mac OS X
Android API	Android 3.1.x and later
MIB	RFC1213、RFC1317
Serial Interface
Connector	DB9 male
No. of Ports	1
Serial Standards	RS-232、RS-422、RS-485
Operation Modes	Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
Baudrate	SupportedStandardsBaudrate（單位= bps）：50、75、110、134、150、300、600、1200、1800、2400、4800、7200、9600、19200、38400、57600、115200、230.4k、460.8k 、921.6k
Data Bits	5、6、7、8
Stop Bits	1、1.5、2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS、DTR/DSR、XON/XOFF
Pull High/Low Resistor for RS-485	1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control	ADDC® (automatic data direction control)
Serial Signals
RS-232	TxD、RxD、RTS、CTS、DTR、DSR、DCD、GND
RS-422	Tx+、Tx-、Rx+、Rx-、GND
RS-485-4w	Tx+、Tx-、Rx+、Rx-、GND
RS-485-2w	Data+、Data-、GND
Power Parameters
Input Current	DC Jack I/P:125 mA @ 12 VDC PoE I/P：180 mA @ 48 VDC
Input Voltage	12 to 48 VDC，Redundant dual inputs, 48 VDC Power-over-Ethernet
No. of Power Inputs	1
Power Consumption	Power input jack PoE
Reliability
Automatic Reboot Trigger	Built-in WDT
Physical Characteristics
Housing	Metal
Dimensions (with ears)	100 x 111 x 26 mm（3.94 x 4.37 x 1.02 in）
Dimensions (without ears)	77 x 111 x 26 mm（3.03 x 4.37 x 1.02 in）
Weight	300 g (0.66 lb)
Environmental Limits
Operating Temperature	NPort P5150A：0 to 60°C（32 to 140°F） NPort P5150A-T：-40 to 75°C（-40 to 167°F）
Storage Temperature (package included)	-40 to 85°C（-40 to 185°F）
Ambient Relative Humidity	5 to 95%(non-condensing)
Standards and Certifications
EMC	EN 55032/24
EMI	CISPR 32，FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD：Contact：4 kV；Air：8 kV IEC 61000-4-3 RS：80 MHz to 1 GHz：3 V/m IEC 61000-4-4 EFT：Power：2 kV；Signal： 1 kV IEC 61000-4-5 Surge：Power：2 kV；Signal：1 kV IEC 61000-4-6 CS：150 kHz to 80 MHz：3 V/m；Signal：3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11
Safety	UL 60950-1
Vibration	IEC 60068-2-6
MTBF
Time	2,231,530 hrs
Standards	Telcordia (Bellcore) StandardsTR/SR
Warranty
Warranty Period	5 years

DEALER

【MOXA】NPort-P5150A Series